InvalidFile = "File %0 is not an image or not of valid type!"
LongDope = "%0 numbered beyond the end of the scene. Lengthen the scene to %1 frames, or dope %2 on 1's following the last valid one, which might result in some being discarded?"
LengthenScene = "Scene isn't long enough to replay a 3D animation %0 frames long. Lengthen the scene or clip the 3D animation to %1 frames?"
ForceClip = "Scene cannot fit %0 frames of 3D animation, and cannot be extended. Clipping to %1 frames"
OlderWorldFile = "Failed to load a World file that is too old for this version of Animo"
NewerWorldFile = "Failed to load a World file that is too *new* for this version of Animo"
CorruptWorldFile = "Failed to load invalid World file"
OneImageIs = "One image is"
ImagesAre = "%0 images are"
Plural = "the additional images"
NoPlural = "the image"
LoadImages = "LoadImages"
Lengthen = "Lengthen"
Clip = "Clip"
DopeOnes = "Dope on 1's"
ViewNamedWorldGraph = "%0"
CantRemoveWorld = "You cannot close a world while open scenes still refer to it."
CantRemoveWorldWhenPlaying = "You cannot close a world while it is playing."
SaveChangesTo = "Save changes to %0?"
DiscardChangesTo = "Discard changes to %0?"
SaveChanges = "Save Changes"
DiscardChanges = "Discard Changes"
OneUnsaved = "One 3D World has unsaved changes."
ManyUnsaved = "%0 3D Worlds have unsaved changes."
ReviewUnsaved = "Review Unsaved"
QuitAnyway = "Quit Anyway"
ClosingWorld="Closing 3D World"
InkWorksNoLicense="Failed to find an Inkworks license."
InkWorksLicenseAllInUse="All Inkworks licenses are in use."
@domain = "arithmetic"
ChannelMain = "Main Image"
ChannelSub = "Subtract Image"
@domain = "asset"
DifferentConversion = "Warning - loading a file (%0) which was saved using a different filename conversion method (%1) from the current one (%2). Proceed with caution."
BackupFail = "Warning: failed to backup %0 to %1."
UpdateFail = "ERROR: failed to update %0. Check that the file is not read-only and try again."
RestoreFail = "Warning: failed to restore backup %0 to %1."
NotShared = "WARNING: The file %0 is not shared.\nYou can either share it and try again, or share it later as:\n%1\nor leave it unshared. If you do not share the file it will not be accessible from other machines."
UnsharedTitle = "Unshared File"
DriveError = "ERROR: There is a problem accessing the drive %0 over the network. Animo will store references to this drive as:\n%1\nPlease see your System Administrator for more help."
InvalidDrive = "ERROR: The file path %0 seems to refer to an invalid drive.\nPlease see your System Administrator."
UnixConvert = "WARNING: Animo cannot automatically convert the UNIX file path:\n%0\ninto Windows format from this machine. The path will be temporarily saved as:\n%1\nThis is likely to result in a \"lost\" file."
UnixTitle = "UNIX Filepath Conversion"
# Base messages
@domain = "base"
Abort = "Abort"
Alert = "Alert"
Apply = "Apply"
Cancel = "Cancel"
Close = "Close"
Continue = "Continue"
Copy = "Copy"
Create = "Create"
Delete = "Delete"
Discard = "Discard"
DontSave = "Don't Save"
Error = "Error"
Exit = "Exit"
FatalError = "Fatal Error"
Finish = "Finish"
Ignore = "Ignore"
IgnoreAll = "Ignore All"
Lengthen = "Lengthen"
No = "No"
NoAll = "No To All"
OK = "OK"
OKAll = "OK To All"
Open = "Open"
Quit = "Quit"
Reload = "Reload"
Remove = "Remove"
Replace = "Replace"
Retry = "Retry"
Save = "Save"
Share = "Share"
TryAgain = "Try Again"
Unnamed = "[unnamed]"
Update = "Update"
Use = "Use"
Warning = "Warning"
Yes = "Yes"
and = "and"
CantMakePrefsDir = "Can't make directory %0\nPreferences not saved."
FailedToSaveImage = "Failed to save image as %0."
UndoTextEdit = "Text Edit"
MenuUndo = "Undo %0"
MenuRedo = "Redo %0"
NTMenuUndo = "&Undo %0 Ctrl+Z"
NTMenuRedo = "&Redo %0 Ctrl+Y"
TrueColourReq = "Warning: Your monitor must be set to a True Color display mode (16777216 or more colors) in order for this application to operate correctly."
DisabledInDemo = "This feature is not available in this demonstration version of Animo."
@domain = "batchmon"
LocalHost = "The configuration file %0 does not contain the hostname of your batch server. Please consult your system administrator."
ServerDown = "The batch server %0 is not responding. Please consult your system administrator."
StillRunningDelete = "This job is still running. Do you really wish to delete it?"
ConfirmDelete = "Are you sure you wish to delete this job?"
ConfirmAllDelete = "Are you sure you wish to delete all completed jobs?"
@domain = "chilib"
DragDropFailed = "Drag and Drop operation failed"
FatalAbort = "Fatal system error - aborting"
FatalAbortTitle = "Fatal System Error"
HelpNotInst = "Help not installed"
NoGraphicsResources = "There are not enough graphics resources to complete operation. You should try closing some applications or windows before continuing.\n\nWarning: if you continue the application may crash."
NoWebCGIScript = "No web browser CGI script is defined. Please ask your system administrator to set production default '*.AnimoCGIURL'."
QuitApp = "Quit App"
ResourcesWarning = "There are not enough graphics resources, you may experience display problems. You should try closing some applications or windows before continuing."
URLOpenFail = "Failed to open URL %0"
@domain = "coco"
WriteProt = "%0 is write protected. You may open the file, but you will be unable to save any changes."
OpenAnyway = "Open Anyway"
CantOpen = "Unable to open file."
BadBPP = "Unable to open file. The number of bits per pixel is not supported."
NoWritePerm = "Failed to save file %0\nYou do not have write permission."
SafetyWarn = "Applying the color modification will permanently and irreversibly alter the image. Are you sure the modification is correct?"
SafetyTitle = "Safety Check"
@domain = "colchooser"
PaletteName = "Palette Name"
Name = "Name"
@domain = "coversheet"
RevokeQuery = "Do you really want to revoke this approval?"
TrimScene = "Cannot trim more than total scene length."
CantShorten = "Cannot shorten scene to this length because there are key cells at later frames."
About3D = "Scene III is not available in this release.\n\nContact Cambridge Animation Systems if you would like to know more about this product."
@domain = "dirimage"
InvalidFile = "File %0 is not an image or not of valid type!"
LongDope = "%0 numbered beyond the end of the scene. Lengthen the scene to %1 frames, or dope %2 on 1's following the last valid one, which might result in some being discarded?"
OneImageIs = "One image is"
ImagesAre = "%0 images are"
Plural = "the additional images"
NoPlural = "the image"
LoadImages = "Load Images"
Lengthen = "Lengthen"
DopeOnes = "Dope on 1's"
@domain = "dirinkpaint"
CantDopeKeys = "Some new keys cannot be automatically doped. Do you want to discard these keys, or dope all the new keys on 1's starting at frame %0?"
Naming = "Naming"
DopeOnOnes = "Dope On 1's"
LengthenIgnore = "This will create keys beyond the end of the XSheet. Lengthen the scene to %0 frames, or ignore %1?"
OneNewKey = "1 new key"
ManyNewKeys = "%0 new keys "
KeysIgnored = "%0 beyond the end of the XSheet will be ignored."
NamingPanel = "You can access the naming panel again through the Drawing column inspector."
MoveUnscanned = "The registration of unscanned drawings cannot be modified until after scanning."
EditRegistration = "Edit Registration"
EditRegistrationExplain = "Moving this border changes the registration of the drawing shown at this frame, and any others selected in the level. Next time you save the scene, this will permanently change the registration stored in the drawing(s)."
NoEditRegistration = "There is no drawing at the current frame, and no drawings selected in the level."
OpenOrCreate = "Open level(s) or create a new level?"
NewNode = "New Ink&Paint Node"
OverwriteLevel = "Replacing an existing Level with a new, empty level will destroy the existing level."
DeleteFailed = "Sorry, attempt to delete existing level failed!\nContact your system administrator."
CantRetime = "Because of the names of the keys, it is not possible to auto retime them."
Promote = "Promote"
NoneScanned = "No selected drawing has been scanned."
NoneProcessed = "No selected drawing has been image processed."
NonePainted = "No selected drawing has been painted."
RemoveScanning = "Remove all information from %0, so that rescanning is required?\n\nThis action cannot be undone, and may cause serious problems for any other users currently accessing the level."
RemoveProcessing = "Remove image processing and painting from %0, so that reprocessing is required?\n\nThis action cannot be undone, and may cause serious problems for any other users currently accessing the level."
RemovePainting = "Remove all inking and painting from %0, so that repainting is required?\n\nThis action cannot be undone, and may cause problems for any other users currently accessing the level."
OneDrawing = "one drawing"
ManyDrawings = "%0 drawings"
UnscanDrawings = "Unscan Drawings"
UnprocessDrawings = "Unprocess Drawings"
UnpaintDrawings = "Unpaint Drawings"
CantCreatePalette = "Cannot create palette. Please consult your system administrator."
AlreadyPrimary = "The palette '%0' is already a primary palette."
ApplyToOther = "Do you wish to apply these changes to the other columns that use this level?"
MoreDrawingsThanKeys = "There are more drawings than keys in level %0. Do you wish to create the new keys or reload the level?"
MoreKeysThanDrawings = "There are more keys than drawings in level %0. Do you wish to delete the extra keys or reload the level?"
LevelChanged = "The level %0 has changed since the last time this scene was opened. Do you wish to reload the level?"
CheckQuestion = "Do you wish to check the levels in this scene?"
CheckLevels = "Check Levels"
SceneIsTrimmed = "Scene is trimmed. Do you wish to continue?"
LevelLengthenIgnore = "Level '%0' is longer than the XSheet. Lengthen the scene to %1 frames, or ignore the additional %2?"
ImportLongLevel = "Import Long Level"
LevelIgnore = "Level '%0' is longer than the XSheet. %1 will be ignored."
ChangeNumColumns = "Change Number of Columns"
NumColumns = "Number of Columns"
UndoImportPalette = "Import Palette"
UndoDeletePalette = "Delete Palette"
UndoMethodChange = "Method Change"
UndoSetNewPalette = "Set New Palette"
UndoEditCellText = "Edit Cell Text"
UndoEditPegging = "Edit Pegging"
UndoFormatChange = "Format Change"
UndoPrefixChange = "Prefix Change"
UndoDisplayChange = "Display Change"
UndoReplaceLevel = "Replace Level"
UndoEditPalette = "Edit Palette"
UndoCheckLevels = "Check Levels"
UndoNaming = "Naming"
UndoEditRegistration = "Edit Registration"
UndoRenameDrawing = "Rename Drawing"
SetLevelName = "Set Level Name"
LevelName = "Level name"
RenamePalette = "Rename Palette"
ChannelToneLevel = "Tone Level"
ChannelToneMatte = "Tone Matte"
ChannelCharacterLevel = "Character Level"
ChannelInk = "Ink"
ChannelPaint = "Paint"
SelPalToDelete = "Please select a palette to delete."
SelPalToEdit = "Please select a palette to edit."
SelPalToDuplicate = "Please select a palette to duplicate."
RenameToManyDrawings = "Must have only one drawing selected."
UpdateOtherCells = "Do you wish to update the other keys in the XSheet which reference this drawing?"
Update = "Update"
MustBeContiguous = "The selection of drawings to be renamed must be contiguous."
CouldNotRename = "Could not rename because this would result in multiple drawings with the same name."
SetupNaming = "Setup Names"
SetupNamingBody = "Would you like to setup drawing names now?"
RemoveCapture = "Do you want to remove the captured images in the selected drawings?"
RemoveCaptureTitle = "Remove Captured Images"
InvalidDrawingName = "This is an invalid name for a drawing. Drawings are named with a number, optionally followed by a lower-case letter."
CantReplace = "Cannot replace an existing level from %0."
NotStylist = "You are not an authorized color stylist, so you cannot edit palettes."
@domain = "dplist"
AttributeInUse = "The attribute '%0' is used in one or more drawings. If you delete it, it will be erased from the drawings."
CantRender = "The attribute '%0' cannot be rendered with this ability."
NoAbilities = "This action is not possible because the attribute '%0' would not be usable without any abilities."
AbilityInUse = "One or more drawings use this ability of '%0'. If you remove this ability, the attribute '%1' will be erased from the drawings."
EraseAttribute = "Making this change to '%0' will cause it to be erased from paint regions in one or more drawings."
OneDrawingUses = "One drawing in the level currently uses attributes from this model. Are you sure you want to remove the color model?"
ManyDrawingsUse = "%0 drawings in the level currently use attributes from this model. Are you sure you want to remove the color model?"
LostCMMOK = "Warning - drawing '%0' was damaged (missing/bad draw.cmm file). It has been automatically repaired."
LostCMMBad = "Warning - drawing '%0' was damaged (missing/bad draw.cmm file). An automatic repair has been attempted. If the ink and paint appear in the wrong colors, please consult your system administrator."
LostModelRef = "Warning - drawing '%0' is damaged (no model tag %1 in kvd). Please consult your system administrator."
@domain = "drawbrowser"
GoToFrame = "Go To Frame"
FrameName = "Frame name"
@domain = "drawpal"
CantCreateDrawingDir = "Couldn't create the drawing directory %0. Please try to correct the problem.\n\n%1"
CopyProblem = "There was a problem when trying to copy file %0 to %1. Please try to correct the problem.\n\n%2"
MissingDrawing = "Error: a required drawing is missing or damaged:\n%0\nProceed with caution."
MissingDrawingTitle = "Missing Drawing"
MissingReg = "Regging information is missing from the file %0. Proceed with caution."
MissingRegTitle = "Missing Reg Info"
RegUpdateCreate = "To update regging information, a file needs to be created in %0. Please try to correct the access permissions."
MaxAttributes = "Sorry, you cannot add any more attributes to this palette. The maximum number of attributes a palette can hold is 256."
Missing = "Missing abilities in attributes named: %0"
Unmatched = "Some attributes are unmatched: %0"
PartialMatch = "Partial Match"
Discard = "Discard"
CreateNew = "Create New"
MissingPaletteWarning = "Missing palette: %0\nProceed with caution."
MissingPalette = "Missing Palette"
ModelNotFound = "Color model %0 not found."
LostModel = "Lost Color Model"
NotFound = "%0 %1 could not be found."
Model = "Model"
Level = "Level"
NeedsUpdate = "%0 %1 needs to be updated, but is write-protected. Please consult your system administrator."
ReplaceModelQuestion = "Couldn't load the model %0. Do you want to find a replacement model?"
ReplaceModel = "Replace Model"
UsedModels = "One or more models used by level"
UpdateRequired = "%0 needs to be updated before it can be accessed."
UpdateWarning = "Update Warning"
UndoAutofill = "Autofill"
DuplicatePaletteNames = "Warning: two palettes in model '%0' are named '%1'. The second has been renamed '%2'."
DuplicateNames = "Duplicate Names"
NothingToReplay = "Nothing selected to replay. Try reselecting the Replay command from the menu bar."
@domain = "drawwindow"
SelectBorder = "Select image border to set view node."
SelectOneBorder = "Select just one image border to set view node."
SetViewNodes = "Can only set view to nodes"
OneBorderChart = "Select just one image border to set field chart node."
ChartNodes = "Can only set field chart for nodes"
SelectTransformNode = "Select transform nodes"
SelectTranslateNode = "Select move nodes"
SelectFieldingNode = "Select fielding nodes"
SelectSrcNode = "Select source nodes"
SelectInkPaintNode = "Select Ink&Paint nodes"
SelectCompositorNode = "Select compositor nodes"
CantLightBox = "Select some nodes to light box."
SelectMoveTags = "Move Tags"
@domain = "fairing"
SizesExplain = "The value of the peak and trough heights must be between 0 and 1. The value of the peak and trough amplitudes must be between -1 and 1."
PositivePeaks = "The number of peaks must be positive."
@domain = "fcurve"
ChangeCurve = "Change Curve"
MoveKeys = "Move Keys"
MoveTangents = "Move Tangents"
ChangeInterpolation = "Change Interpolation"
AddKey = "Add Key"
DeleteKey = "Delete key"
MoveSamples = "Move Samples"
@domain = "filepanel"
AskAutoFind = "Do you want to automatically find similar files?"
Found = "Found %0"
Cancelled = "Cancelled %0"
AskGiveUp = "Do you want to give up on similar files?"
@domain = "filters"
ChannelMatte = "Matte"
ChannelImage = "Image"
ChannelUpperImage = "Upper Image"
ChannelLowerImage = "Lower Image"
@domain = "glyph_tools"
Percent = "%0%"
PercentSnap = "%0% - Snap"
Degree = "%0░"
DegreeSnap = "%0░ - Snap"
MORE_THAN_ONE_PIN = "More than one pin selected"
MOVE_ORIGIN = "Move Origin"
ROTATE_NO_SNAP = "Rotate (No Snap-To)"
ROTATE_PIN = "Rotate Pin"
SCALE_LIMIT = "Scale Limit Reached! (Release and repeat to go further.)"
SCALE_NO_SNAP = "Scale (No Snap-To)"
SCALE_PIN = "Scale Pin"
@domain = "gtools"
ReallyDelete = "Do you really want to delete the selected objects?"
ZOOM_IN = "Zoom In"
ZOOM_IN_LIMIT = "Zoom In limit reached"
PAN = "Pan"
SHIFT_SELECT = "Shift Select & Constrain"
SNAP_TO = "Snap!"
ALTERNATE_SELECT = "Select & Move (No snap-to)"
SCALE = "Scale"
ROTATE = "Rotate"
DIRECTIONAL_SCALE = "Squash or Stretch"
PRESERVE_VOL_SCALE = "Squash and Stretch"
CANT_SCALE = "Selection cannot be scaled"
CANT_ROTATE = "Selection cannot be rotated"
NOTHING_SELECTED = "Nothing Selected!"
MIRROR_EMT = "Mirror"
####unused below here####
ADD_PIN_EMT = "Drop and drag new pin"
CANT_EDIT_CURVE_EMT = "Can't Edit Paths Here!"
CANT_MIRROR_PIN_EMT = "Can't mirror pins"
COPY_EMT = "Copy"
CUT_EMT = "Cut"
DEFAULT_VIEW_EMT = "Reset Zoom"
DRAG_ORIGIN_EMT = "Dragging Origin"
EDIT_TEXT_EMT = "Edit Text"
EXIT_EMT = "Bye Bye"
ILLEGAL_PARENT_EMT = "Illegal Parent Selected"
MIRROR_NO_SNAP_EMT = "Mirror (No Snap-To)"
NEW_PARENT_SELECTED_EMT = "Release to repin"
NEW_TEXT_EMT = "Add Text"
NO_PIN_SELECTION_EMT = "No Pin Selected"
PASTE_EMT = "Paste"
PLACE_PIN_EMT = "Drag to position"
REPIN_DONE_EMT = "Repin completed"
REPIN_EMT = "Repin Tool"
SELECTFILL_EMT = "Select Fill"
SELECT_ALL_EMT = "Select All"
SETELLIPSE_EMT = "Set elliptical path"
SETELLIPSE_NOT_EDITABLE_EMT = "Selected pin is not editable"
SETELLIPSE_NOT_POLAR_EMT = "Selected pin not polar"
SETELLIPSE_NO_PARENT_EMT = "Selected pin has no parent"
SETELLIPSE_NO_PIN_EMT = "No pin selected"
SETELLIPSE_TOO_MANY_PINS_EMT = "More than one pin selected"
SKETCH_CANT_ADD_EMT = "No valid Key or Timeline to Sketch into!"
SKETCH_EMT = "Sketch Tool"
SKETCH_ERASE_BOX_EMT = "Erase Sketch Box Tool"
SKETCH_ERASE_EMT = "Erase Sketch Tool"
TAPETOOL_EMT = "Tape Measure Tool"
TEXT_SELECT_EMT = "Select Text"
TEXT_SHIFT_SELECT_EMT = "Shift Select Text & Constrain"
VIEW_PIN_EMT = "Select Viewing Pin"
ZOOM_OUT_EMT = "Zooming Out"
####end unused####
@domain = "image"
DPILocked = "the client application has locked the resolution."
TypeLocked = "the client application has locked the image type."
SizeLocked = "the client application has locked the image size."
BrightLocked = "the client application has locked the brightness."
ContLocked = "the client application has locked the contrast."
OutOfMemory = "OUT OF MEMORY: Couldn't allocate %0K for pixmap."
DGFailure = "Direct Graphics failure in %0 - please investigate."
@domain = "inkpaint"
ReplacingModel = "Replacing an existing model with a new model will destroy the existing model."
ReplaceModelFailed = "Sorry, attempt to delete existing model failed!\nContact your system administrator."
ReplacingLevel = "Replacing an existing level with a new level will destroy the existing level."
ReplaceLevelFailed = "Sorry, attempt to delete existing level failed!\nContact your system administrator."
ReplacingSequence = "Replacing an existing sequence with a new sequence will destroy the existing sequence."
ReplaceSequenceFailed = "Sorry, attempt to delete existing sequence failed!\nContact your system administrator."
Model = "model"
Level = "level"
UnscannedDrawings = "Some drawings in this %0 have not been scanned. Please make a selection."
RegLicenseInUse = "Drawings in this %0 are regged, but all licenses for animo_paint_reg are in use. The %1 will not be opened."
NoRegLicense = "Drawings in this %0 are regged, but a license for animo_paint_reg could not be found. The %1 will not be opened."
ImageLoadingError = "There was an error loading the selected image. Please contact your system administrator."
BadImageBPS = "The selected image does not have 8 bits per sample, and so could not be loaded."
CantCreateHere = "You cannot create a file in this location. Check your permissions at this location, or contact your system administrator."
UnsavedChanges = "The %0 %1 has unsaved changes!"
SaveModel = "Save Model"
SaveLevel = "Save Level"
DontSave = "Don't Save"
MaintainConsistencyClose = "To maintain consistency of saved data, other windows with unsaved data have to be closed as well."
MaintainConsistencySave = "To maintain consistency of saved data, other windows have to be saved as well"
Quitting = "Quitting"
ClosingWindow = "Closing Window"
NewModel = "New Model"
Opening = "Opening"
OpeningSelection = "Opening Selection"
Closing = "Closing"
Saving = "Saving"
AlreadyShared = "Drawing %0 is already shared with this color model."
AnotherModel = "another model"
OtherModels = "other models"
DrawingUsesOtherAttributes = "Because the drawing uses attributes from %0, it cannot be shared with this model. This model will take a copy, with the other attributes removed."
DrawingsUseOtherAttributes = "Because the drawings use attributes from %0, they cannot be shared with this model. This model will take copies, with the other attributes removed."
AddDrawings = "Add Drawings"
ShareOrCopySing = "Do you want this model to share the drawing with the level, or take a copy of it?"
ShareOrCopyPlural = "Do you want this model to share the drawings with the level, or take copies of them?"
SaveChanges = "Save changes to the drawing %0 before removing it?"
RemoveDrawing = "Remove Drawing"
NoLevelRefs = "No level reference drawings for this model were found"
DrawingUsesOtherAttributes2 = "Because the drawing uses attributes from %0, it cannot be shared with the model. The model will be given a copy, with the other attributes removed."
AddDrawingToModel = "Add Drawing To Model"
ShareOrCopy = "Do you want the model to share the drawing with the level, or be given a copy of it?"
RegLicenseInUsePlain = "All licenses for animo_paint_reg are in use."
NoRegLicensePlain = "A license for animo_paint_reg could not be found."
AddModelToLevel = "Do you want to add the newly-created model to the level?"
UndoPastePalette = "Paste Palette"
UndoSetPaletteColumns = "Set Palette Columns"
UndoRenamePalette = "Rename Palette"
UndoRenameDrawing = "Rename Drawing"
UndoRemovePalette = "Remove Palette"
UndoImportPalette = "Import Palette"
UndoAddPalette = "Add Palette"
RenameDrawing = "Rename Drawing"
DrawingName = "Drawing Name"
SetNumColumns = "Set Number of Columns"
NumColumns = "Number of Columns"
SetModelName = "Set Model Name"
ModelName = "Model name"
SetLevelName = "Set Level Name"
LevelName = "Level name"
NameNewPalette = "Name New Palette"
NamePastedPalette = "Name Pasted Palette"
NameImportedPalette = "Name Imported Palette"
RenamePalette = "Rename Palette"
@domain = "iproc"
LoadFailed = "Failed to load image for viewing."
NoBatchPlugin = "Unable to load batch submission plug-in.\nContact your system administrator"
NoneToSubmit = "There are no files to submit for processing."
FileSubmitted = "%0 submitted to the batch image processor\nRun the Batch Monitor application to view progress."
OKAll = "OK All"
CantSubmit = "%0 could not be submitted to the batch image processor."
SelectOne = "One drawing must be selected for viewing."
NoImages = "No images are selected for processing."
@domain = "license"
FailedToFind = "Failed to find a license for this application"
AllInUse = "All licenses for this application are in use"
StylesInUse = "All licenses for animo_graphic_styles are in use."
NoStylesLicense = "Unable to find a license for animo_graphic_styles."
ColCorrInUse = "All licenses for animo_color_corrector are in use."
NoColCorrLicense = "Unable to find a license for animo_color_corrector."
NotAuthorized = "This machine is not authorized to run %0."
ExpiryWarning = "The license for %0 expires %1.\nPlease contact Cambridge Animation Systems."
Today = "today"
Tomorrow = "tomorrow"
InNDays = "in %0 days' time"
LicenseProblem = "There is a licensing problem. Please save your work and quit the application."
# Base messages
@domain = "misc"
InvalidReplacement = "Please alert your system administrator. The replacement string %0 in the file %1 is not a valid directory name."
CantFindHomeDir = "Can't find home directory.\nPreferences not saved."
CantMakeDir = "Can't make directory %0\nPreferences not saved."
@domain = "multiplane"
UndoDepth = "Depth"
UndoCameraDepth = "Camera Depth"
UndoCameraPisition = "Camera Position"
UndoLensAngle = "Lens Angle"
UndoMove = "Move"
UndoRotate = "Rotate"
UndoCameraTranslate = "Camera Translate"
UndoFocalLength = "Focal Length"
@domain = "naming"
NoNameSelected = "No name selected."
Service = "Naming Service"
CantChangeLast = "Can't change the last name - it is a constraint."
CantDeleteConst = "Can't delete a constraint."
CantDeleteFirst = "Can't delete first name."
ConfirmDelete = "Confirm to delete names from %0 onwards."
DeleteNames = "Delete Names"
@domain = "nodeedit"
UndoRotate = "Rotate"
UndoScale = "Scale"
UndoMoveCenter = "Move Center"
UndoVectorEdit = "Vector Edit"
UndoMove = "Move"
UndoEWMove = "E/W Move"
UndoNSMove = "N/S Move"
UndoXScale = "X Scale"
UndoYScale = "Y Scale"
UndoXYScale = "XY Scale"
UndoShear = "Shear"
@domain = "olproc"
FirstUse = "This is the first time the OL %0 has been used in regging. Some processing is now required."
OLProcessing = "OL Processing"
AskTrace = "Are there internal reg-to feature lines in the OL %0 which need to be traced?"
FeatureTrace = "OL Feature Tracing"
RunOrCancel = "You can either run InkPaint now, or cancel opening this level until the lines have been traced."
LaunchInkPaint = "Launch InkPaint"
RunInkPaint = "Use InkPaint to trace the required internal feature lines. When you have finished, return to ImageProcessor and open this level again."
UseInkPaint = "Use InkPaint to trace lines into %0, then image process this level again."
LaterTrace = "If you later require internal feature lines, use InkPaint to trace them into %0, then image process this level again."
@domain = "output"
DatabaseFail = "Failed to create a new output device database."
TypesFail = "Failed to build the device types data."
InstancesFail = "Failed to build the device instances data."
InstanceCreateFail = "Failed to create a new device instance."
MovieAddFail = "Failed to add 'Movie' device instance to device database."
FileAddFail = "Failed to add 'File' device instance to device database."
ImageListBuildFail = "Failed to create new list for image types."
ImageListBuildDir = "Failed to build list of image types, check ImageTypes.cfg in %0."
MovieListBuildFail = "Failed to create new list for movie types."
MovieListBuildDir = "Failed to build list of move types, check MovieTypes.cfg in %0."
PresetsFail = "Failed to create new image presets database."
PresetsBuildFail = "Failed to build the image presets database."
AllocateJobFail = "Failed to allocate job."
AllocateJobObFail = "Failed to allocate a new job object."
FrameListReadFail = "Frame list could not be read properly."
FrameHoldSetFail = "Failed to set frames and holds."
TrimmedQuestion = "Scene is trimmed. Do you wish to continue?"
StartFrameReq = "The chosen output device requires a start frame number. Enter a suitable number for the start position on the device in the 'start frame' field."
StartFrameNum = "The selected device requires that the 'start frame' field contains a simple number. Enter a suitable number in this field for the start frame position on the device."
NegStartFrame = "An output device's 'start frame' number cannot be less than one!"
TooManyFrames = "There is insufficient space on your disk recorder to store the number of frames selected. Either select fewer frames to render, or specify a lower start frame number."
JobNameReq = "The chosen output device requires a name for the output sequence. Enter a suitable name in the 'job name' field."
NoImageNames = "Failed to find image type names."
TypeNameReq = "A file or movie requires a type name."
TypeNamesFail = "Failed to get list of image type names."
DirNameReq = "An output directory and sequence name must be specified in the file path."
DirReq = "An output directory must be specified in the file path."
SeqNameReq = "An output sequence name must be specified in the file path."
CreatePanelFail = "Failed to create an Output Panel"
PanelSetFail = "Failed to set scene data in Output Panel"
OpenError = "Error attempting to open file '%0', check that this file exists and is readable"
LineTooLong = "Line %0 in cfg file '%1' is too long (limit %2)."
ReadError = "Read error in file '%0'"
MissingLabel = "Failed to find expected parameter '%0' at line %1 in cfg file '%2'"
EmptyParam = "Empty value for mandatory parameter '%0' at line %1 in cfg file '%2'"
NoType = "Error in the definition of a device type: failed to get its type name."
NoValue = "Error in the definition of device type '%0': failed to get a value for param '%1'"
TypesBeforeInstances = "Device types must be built before instances."
NoInstName = "Error in the definition of a device instance: failed to get its instance name."
NoInstValue = "Error in the definition of device instance '%0': failed to get its %1."
BadInstType = "Error in the definition of device instance '%0': failed to find its device type '%1' in the list of device types."
TypeName = "type name"
HostName = "host name"
PathName = "path name"
FrameCapacity = "frame capacity"
FailedToSubmit = "Failed to submit job to the batch server. Consult your system administrator."
NoServerHost = "Unable to read configuration file %0.\nContact your System Administrator"
LocalHost = "The configuration file %0 does not contain the hostname of your batch server.\nContact your system administrator."
NoScratchDir = "Your batch server %0 is not configured to share a directory at %1.\nContact your system administrator."
FailedToSaveScratch = "The scene could not be saved to the server's scratch directory.\nContact your system administrator."
NotShared = "The output directory %0 does not appear to be shared. It must be shared in order for the batch workers to write to it across the network."
PVRFail = "Transfer of %0 to %1 failed. Consult your system administrator."
RCPFail = "Failed to run %0 command to transfer to %1. Consult your system administrator."
MakeWav = "Do you want to save a sound file which you can load into the Perception player?"
OutputSound = "Output Sound"
RealityInit = "Create the clip file %0 on %1, making it %2 frames long and %3 an alpha channel."
With = "with"
Without = "without"
@domain = "palui"
CantModifyAttribute = "This attribute cannot be modified"
PaletteFull = "Sorry, you cannot add any more attributes to this palette. The maximum number of attributes a palette can hold is 256."
CantModifyNamedAttribute = "The attribute %0 may not be modified."
MaxColumns = "Maximum number of palette columns supported is %0"
RearrangeAttributes = "Rearrange Attributes"
AttributeCut = "Sorry, cut of attributes within color models is not supported. If you need to rearrange attributes within a color model, you can use drag and drop. If you really want to cut attributes, you can use copy and then delete. However, copy only copies attributes in the selected palette: attributes in other palettes will be lost on delete."
CantDeleteAttribute = "The attribute %0 may not be deleted."
CantDeleteAttributes = "The attributes %0 may not be deleted."
DeleteRemaining = " Do you still wish to attempt to delete the remaining selected attribute?"
DeleteRemainingPlural = " Do you still wish to attempt to delete the remaining selected attributes?"
DeleteAttributes = "Delete Attributes"
DuplicateName = "There is already a palette named '%0' in this model. Please give a new name."
NoName = "A palette must have a name!"
UndoSetAttribute = "Set Attribute"
UndoSetAbility = "Set Ability"
UndoRenameAttribute = "Rename Attribute"
UndoNewAttribute = "New Attribute"
UndoRearrangeAttributes = "Rearrange Attributes"
UndoDropAttributes = "Drop Attributes"
UndoPasteAttributes = "Paste Attributes"
UndoSetPaletteColumns = "Set Palette Columns"
UndoDeleteAttributes = "Delete Attributes"
PaletteName = "Palette name"
@domain = "perspective"
UndoPerspective = "Perspective"
@domain = "picker"
CantMakeDir = "Can't make directory %0.\nLayout not saved."
CouldntAddPal = "Could not add palette."
NoNameSelected = "Palette name required."
CouldntLoad = "Could not load palette."
NoFileSelected = "No file selected."
CouldntRename = "Could not rename palette."
CouldntDelete = "Could not delete palette."
NoPalette = "No palette is selected."
CantMakePalDir = "Can't make directory %0.\nPalette not saved."
SpecialChars = "Name contains special characters.\nE.g. '/'."
UniqueName = "Name must be unique."
CantMakePalsDir = "Can't make directory %0.\nPalette not saved."
@domain = "pixmod"
FailedSave = "Failed to save the color modification."
SavingTitle = "Saving Color Modification"
FailedLoad = "Failed to load the requested color modification."
LoadingTitle = "Loading Color Modification"
UndoColorCorrection = "Color Correction"
@domain = "prodman"
PMTitle = "Production Management System"
NotInitialised = "Production Management System not initialised (internal error)"
ODBCError = "ODBC Error: %0\n\n%1"
InitFailedCODE = "CASPM000"
InitFailedMSG = "Problem initialising ODBC - The program may have insufficient memory."
NoDiagsMSG = "ODBC error: no diagnostics available (internal error)"
ErrCodeReturnedCODE = "CASPM004I"
ErrCodeReturnedMSG = "Error code %0 was returned (internal error)"
StartPrompt = "There is a ready task:\n\n%0 %1 %2\n\nDo you want to start it?"
ContinuePrompt = "There is a task in progress:\n\n%0 %1 %2\n\nDo you want to make it the current task?"
NoTaskWarning = "There is no appropriate task for this file:\n\n%0\n\n%1"
NoTaskQuestion = "Do you want to open it anyway?"
NoTaskForbid = "Your system has been set to refuse access without a task"
CompleteQuestion = "Do you want to mark this task as complete?\n\n%0 %1 %2"
CreatePrompt = "This file is not in Production Tracking.\n\n%0\n\n Do you want to add it?"
FailedStatusUpdate = "Production Tracking could not update a task's status. This may be because the status has recently been changed by someone else."
CantStartIfUnknownUser = "Production Tracking cannot start a task, since it does not know your user identity."
CantUndo = "The task status cannot be changed because another task depending on it is already in progress or complete."
@domain = "profiles"
SubscribeOrCopy = "Do you want to subscribe to this list, or take a copy of it?"
SubscribeToList = "Subscribe to List"
Subscribe = "Subscribe"
Copy = "Copy"
ErrorReading = "Error reading %0. Do you want this profile list to be removed from your list of subscriptions?"
NameColourProfile = "Name Color Profile"
NameOpacityProfile = "Name Opacity Profile"
ProfileName = "Profile Name:"
DuplicateProfileName = "There is already a profile named '%0' in this list. Please give a new name."
NoProfileName = "A profile must have a name!"
RenameList = "Rename List"
ListName = "List Name:"
DuplicateListName = "There is already a list named '%0' in this store. Please give a new name."
NoListName = "A list must have a name!"
RenameColourProfile = "Rename Color Profile"
RenameOpacityProfile = "Rename Opacity Profile"
NoProfileToUse = "You must select a profile from a list before you can use it."
NoProfileToAdd = "You must have a profile before you can add it to a list."
ListNotEditable = "This subscribed list cannot be modified."
@domain = "progui"
Button="Create Button Tool"
HScroll="Create HScroll Tool"
VScroll="Create VScroll Tool"
Frame="Create Frame Tool"
TickBox="Create TickBox Tool"
Canvas="Create Canvas Tool"
ColWell="Create ColWell Tool"
RadioButton="Create RadioButton Tool"
List="Create List Tool"
Combo="Create Combo Tool"
StaticText="Create StaticText Tool"
Edit="Create Edit Tool"
@domain = "ps"
MissingFont = "Could not find an outline file for font %0."
PSError = "PostScript Error"
UseCourier = "Use Courier"
InitFileMissing = "PSInit file not found in %0 or in %1. PostScript interpreter cannot start."
BadFont = "Font file %0 is invalid."
@domain = "ptscan"
ChooseDst="Sorry, you can only name empty columns or insert names at a selected frame."
QueuedImages="There are queued images. Please select the Ink and Paint column into which you wish to place them."
NoVideoDrivers="No video capture drivers found"
NeedCalibrate="The video capture system must be calibrated before images can be captured"
NoDestForFiles="Please select a drawing column containing unscanned drawings into which images will be captured"
NoScanningLicense="No license could be found for PencilTester scanning."
ConfirmReshoot="Do you wish to reshoot drawing %0?"
ConfirmReshootTitle="Reshoot drawing"
NoColorInLevel = "cannot scan color images into a level."
CantConnectToDriver = "Can't connect to the video driver. Please check that the driver is not in use by another application."
@domain = "regnode"
LinksDeleted = "Reg links in %0 have been deleted because they are incompatible with this change.\nUse undo to restore."
OneKeyCell = "one key cell"
ManyKeyCells = "%0 key cells"
RegNotSaved = "The reg information for '%0' has not been saved into the drawings. Please save it using the reg column inspector, then save the scene again."
CantSaveReg = "The reg information for '%0' cannot be saved because of %1"
CantSaveBadIPNode = "The reg information for '%0' cannot be saved because node '%1' is not an Ink&Paint node."
CantSaveBadBGNode = "The reg information for '%0' cannot be saved because node '%1' is not a BG/OL node."
MissingLevel = "missing level %0."
ManyMissingLevels = "%0 missing levels."
SaveRegAborted = "Save of reg information aborted due to problems copying drawings."
SaveRegInfo = "Save Reg Info"
SavingWill = "Saving the reg information for '%0' will "
DontSaveReg = "Don't Save Reg"
OneDrawing = "drawing '%0'"
ManyDrawings = "%0 reg drawings"
RemoveProc = "remove image processing and painting from %0"
And = ", and "
MakeCopies = "make %0 of %1"
DupCopy = "a duplicate copy"
DupCopies = "%0 duplicate copies"
InfoDeleted = "Registration information in %0 has been deleted because of this change.\nUse undo to restore."
OneColumn = "one column"
ManyColumns = "%0 columns"
ChannelRegDrawing = "Reg Drawing"
ChannelRegToAndBG = "Reg-to Drawings and BG lines"
ChannelRegToOL = "Reg-to OLs"
ChannelDrawingsAndBG = "Drawings and BG lines"
ChannelOLAndFX = "OLs and FX Images"
ChannelRegRegToDrawing = "Reg or Reg-to Drawing"
ChannelRegMatte = "Reg Matte"
UndoRegInputTypeChange = "Reg Input Type Change"
UndoRegCompositeChange = "Reg Composite Change"
UndoAddReg = "Add Reg"
UndoRemoveReg = "RemoveReg"
@domain = "replay"
CantLoadJPEG = "Cannot load this JPEG compressed movie."
CantLoad = "Cannot load this movie/image sequence."
MismatchedNames = "The number of frame names for this replay does not match the number of frames in the movie. Ignore frame names?"
DupName = "Name %0 already exists.\nPegbar not added."
CenterError = "Error modifying center data.\nPegbar not changed."
PegbarError = "Error modifying pegbar data.\nPegbar not changed."
ICCNotFound = "ICC color profile file not found for this image."
CalibrationScan = "Calibration Scanning"
CalibrateOne = "To calibrate a scanner, the calibration chart must itself be calibrated.\nPlace the calibration chart on the scanner, so that it is as close to the pegbar as possible, while ensuring that the entire chart including the peg-holes can be scanned (i.e. NOT on a pegbar)."
CalibrateTwo = "Place the calibration chart on the selected peg. A series of scans will now be carried out."
CalibrateThree = "Place a drawing with a crosshair drawn at the current field chart center on the selected peg."
CalibThreeFailed = "Failed to find crosshair. Ensure that the scanner's brightness and contrast are set so that the crosshair can clearly be seen in black on a white background when you do a Preview scan."
CalibrateDone = "%0 now calibrated. The calibration has been saved.\nIf you have moved the physical pegbar from a position along one of the other edges of the scan bed, you may want to clear the old calibration for that position. You can do this in the Calibration Panel.\nBut don't clear the new calibration for the %1!"
CalDatabaseNotFound = "No calibration database found - file %0 not found. Confirm to create a database."
Recalibrate = "%0 already calibrated - are you sure you want to re-calibrate scanner?"
RecalibrateScanner = "Recalibrate"
ChangeError = "Error in calibration - values have changed too much in going from approximate to accurate values. Something has probably gone wrong with scanning."
WonkyPegbar = "Warning: pegbar is not very straight relative to the scanner bed. You can continue with the scanner calibration, but you might want to straighten the pegbar and start again."
NoImage = "Scan failed to return an image."
ResolutionError = "Error on scanning - expected resolution could not be used for some reason."
PegbarInside = "The calculated pegbar position is inside the scan area. Maybe you forgot to place the calibration chart on the physical pegbar."
SaveCalibrationAnyway = "Save Anyway"
UpdateFailed = "Failed to update the scanner database."
SaveCenters = "Save changes to center database?"
InvalidFields = "One of more fields are invalid.\nPegbar not added."
KeepField = "Keep Edited Field?"
FieldChanged = "Field Changed"
Keep = "Keep"
DontKeep = "Don't Keep"
GratLoadFail = "Failed to load graticule chart database."
ClearCalibration = "Clear Calibration"
CalibUpdateFail = "Failed to update the calibration database."
AutofeedReq = "Failed to set new default chart value. Autofeed calibration info is required for this particular scanner and field chart type before it can be set as a default. You can generate this by pressing the calibrate button while in autofeed mode with the field chart set to the desired type and then doing an autofeed scan with the corresponding paper."
CantClear = "Cannot clear the calibration information from %0 - it is not calibrated."
ConfirmClear = "Confirm to clear the calibration information from %0"
CalibLoadFail = "Failed to load in calibration database."
ReadingGrat = "Reading Selected Graticule Chart"
NoGratEntry = "Failed to find a graticule chart entry for this particular scanner."
SavePegbarDB = "Save changes to pegbar database?"
DetectError = "Error whilst detecting %0 in autofeed image: %1\nThis may be because the paper is not the right way around, or because the scanner settings do not set the correct maximum scanning area/paper size."
GeneralDetectError = "Error whilst detecting %0 in %1 scan: %2"
Flatbed = "flatbed"
Pegbarred = "peg-barred"
GeneralSearchError = "Error whilst searching %0 scan for %1: %2"
NoAutofeedInfo = "There is no autofeed information available for the %0 fieldchart selected in the Calibration panel, in relation to the %1. This information will be generated on the next scan."
AutofeedScanning = "Autofeed Scanning"
ManualScanning = "Manual Scanning"
CalDatabaseNotFoundStop = "No calibration database found - file %0 not found."
CalibWarning = "\nWARNING: Without calibration information, scans may not be properly aligned relative to each other."
AccessCalib = "Accessing Calibration Database"
ChartWarning = "No fieldchart database found - file %0 not found."
AccessChart = "Accessing Fieldchart Database"
PegbarNotCal = "WARNING: You have not calibrated this pegbar. Scans carried out before the chosen pegbar is calibrated may not be properly aligned relative to each other."
NoAlignment = "WARNING: No alignment information available. This is probably because you have not calibrated the selected pegbar. Scans carried out before the chosen pegbar is calibrated may not be properly aligned relative to each other."
KeepWarningMe = "Keep Warning Me"
DropWarnings = "Drop Warnings"
CancelScanning = "Cancel Scanning"
ChartSaveError = "Error saving fieldchart database - failed to open database file %0"
UpdatingChart = "Updating Fieldchart Database"
MoveCalib = "Calibration database has calibration data for %0, on host %1.\nConfirm to move calibration information from this host to host %2."
ScannerInit = "Scanner Initialization"
UpdateData = "Update Data"
Invalidate = "Invalidate Stored Data"
CalibConfirm = "Calibration adjustment confirmed"
AutofeedNextPeghole = "Scanning is in autofeed mode.\nPeghole information will be regenerated on the next scan."
Calibration = "Calibration"
NoAutofeeder = "No autofeeder attached on this scanner."
NoPanel = "There is no scanner settings panel for this scanner."
BadDPI = "Scanner does not support scanning at a resolution of %0 dpi."
NoSupport = "Scanner does not support %0 scanning."
Grayscale = "grayscale"
Color = "color"
ClientType = "client-constrained type of"
NoTypes = "The current scanner driver doesn't claim to support any suitable scan types."
NoList = "Couldn't get scanner list."
NoScanners = "No scanners attached."
TotalAreaFail = "Failed to set scan area to total scanbed area in driver."
AutofeedEmpty = "No drawings in autofeeder."
PreviewScan = "Preview Scan"
PreviewAborted = "Preview Scan has been aborted."
AreaOutside = "Scan area is outside the scannable area.\nYou will need to re-select the scan area."
DrawingNoAlignment = "Some drawings failed to scan properly - alignment information could not be calculated from them.\nYou will need to re-scan the drawings that failed to scan."
SelectedOutside = "The selected scan area was not completely within the scannable area for one or more scans.\nYou will need to check whether each of the scans managed to get the desired image area."
ScannableAreaFail = "Failed to set scan area to total scannable area in driver."
ScanAborted = "Scan has been aborted."
PlaceOrFinish = "Place %0 on the scanner, or finish scanning."
NextDrawing = "next drawing"
ClientAreaFail = "Failed to set client-defined scan area in driver."
MaxAreaFail = "Failed to set scan area to maximum in driver."
ScannerError = "Scanner Error"
NoDriver = "No scanner driver."
DepthError = "Scan depth error."
ResolutionCapError = "Error in determining scanner resolution capabilities."
FailedToConvert = "Failed to convert %0 to the required image format."
ImageSelection = "Image Selection"
ConstraintFail = "You cannot load %0 because:\n"
CantDoAccuracy = "The center cannot be realigned until %0 is calibrated."
CantAutofeedRealign = "Realign Center is only available for pegged manual scanning."
@domain = "scanbg"
CantMakeOL = "An overlay cannot be constructed from these images."
DeleteSection = "Delete the selected image section?"
DifferentICC = "Image does not have the same ICC Color profile as the other images, or the color profile for its input device cannot be found. Adding it will probably produce bad splice results"
DontAdd = "Don't Add"
AddAnyway = "Add Anyway"
CMSFailed = "Warning: failed to initialize the color management system: %0."
UnsavedImage = "The image window is unsaved."
QuitAnyway = "Quit Anyway"
CloseAnyway = "Close Anyway"
OneWindow = "You can only have one splice window at a time. Do you want to discard what you have done in the current window?"
NoSize = "Cannot save - image has no size."
WriteProt = "%0 is write protected. Cannot write file."
SaveFailed = "Failed to save %0 file %1\n%2"
Aborted = "Aborted by user."
PermOrFull = "Either you do not have write permission, or the disk is full."
Tiled = "tiled"
TIFF = "TIFF"
LoadSaveFail = "Failed to load data for writing output TIFF. No file was saved."
ICCLinkFail = "Could not create ICC color profile file link %0."
CombineOrStart = "There is a selected image section in the image window. Do you want to combine it with the next scanned image to form an overlay, or start making a new overlay with the next scanned image?"
UseSelected = "Use Selected Image"
StartOL = "Start New Overlay"
LoadFailed = "Could not load image."
ResolutionError = "The resolution of the new image is %0 DPI. The resolution of the image being generated is %1 DPI. Therefore, this image will be the wrong size."
BPSError = "The image section you are attempting to load has %0 bits per sample. This does not match the image being generated, which has %1 bits per sample.\nThe image section cannot be loaded."
UnsupportedType = "The type of the image section you are attempting to load is not supported. It has:\n%0 samples per pixel and\n%1 bits per sample.\nThe image section cannot be loaded."
UnableToSaveTiled = "Unable to save tiled file"
SaveAsTiled = "Saving Spliced Image As Tiled"
UnableToSaveTIFF = "Unable to save TIFF file"
SaveAsTIFF = "Saving Spliced Image As TIFF"
NoImageAcquired = "No image was acquired."
NoTwain = "Twain is not installed. Please consult your system administrator if you wish to use this service."
OverlayFailImageSize = "These two images cannot be made into an overlay because they have different sizes."
OverlayFailTileSize = "These two images cannot be made into an overlay because they have different tile sizes."
@domain = "scanlevel"
NewModel = "New Model"
NewLevel = "New Level"
UnsavedModel = "The model %0 has unsaved changes!"
UnsavedLevel = "The level %0 has unsaved changes!"
SaveModel = "Save Model"
SaveLevel = "Save Level"
ReplacingModel = "Replacing an existing model with a new model will destroy the existing model."
ReplaceModelFailed = "Sorry, attempt to delete existing model failed!\nContact your system administrator."
ReplacingLevel = "Replacing an existing level with a new level will destroy the existing level."
ReplaceLevelFailed = "Sorry, attempt to delete existing level failed!\nContact your system administrator."
NoDrawings = "No drawings found."
NoLevelsInScene = "No levels found in this scene."
NoLevelsInScenes = "No levels found in these scenes."
ScanScenes = "Scan Scenes"
OneUnscannedFound = "There is one unscanned drawing in level '%0' (%1)"
NUnscannedFound = "There are %0 unscanned drawings in level '%1' (%2)"
OneMoreToCheck = "\n\n(one more level to check)"
NMoreToCheck = "\n\n(%0 more levels to check)"
UnscannedDrawings = "Unscanned Drawings"
ScanNow = "Scan Now"
InvalidPegging = "That is not a valid pegging value."
NoNaming = "Cannot insert images without a naming service selected."
RescanWarning = "Rescan Warning"
OnlyUnscanned = "Only Unscanned"
RescanAll = "Rescan All"
PartialUnscanOne = "Scan only the selected unscanned drawing, or all %0 selected drawings"
PartialUnscanN = "Scan only the %0 selected unscanned drawings, or all %1 selected drawings"
ReplacingScanned = " (replacing the %0 already scanned)?"
PasteOverOne = "Replace the selected drawing"
PasteOverN = "Replace the %0 selected drawings"
PasteWithOne = " with the pasted drawing?"
PasteWithN = " with %0 pasted drawings?"
PasteDrawings = "Paste Drawings"
NoNamesOne = "No name supplied for pasting the drawing."
NoNamesN = "Insufficient names supplied for pasting %0 drawings."
InsertImageNameReq = "Both image creation and naming services must be selected in order to perform images insertion."
InsertNameReq = "A naming service must be selected in order to perform name insertion."
ProcessBoth = "Cannot process images and names simultaneously: please select one or the other."
NoImageSel = "No image creation service selected."
NoNameSel = "No name creation service selected."
DeleteWithoutName = "Cannot delete names without a name creation service selected."
Closing = "Closing"
Opening = "Opening"
Quitting = "Quitting"
ClosingWindow = "Closing Window"
NoColorInLevel = "cannot scan color images into a level."
NumericPegging = "Numeric Pegging"
InputPeggingInUnits = "Input a new pegging in %0:"
SetLevelName = "Set Level Name"
SetModelName = "Set Model Name"
LevelName = "Level name:"
ModelName = "Model name:"
RenameLevel = "Rename Level"
RenameModel = "Rename Model"
ReallyDeleteOne = "Delete 1 drawing?\nThis operation cannot be undone."
ReallyDelete = "Delete %0 drawings?\nThis operation cannot be undone."
InvalidPosition = "'%0' is not a drawing in this %1."
Level = "level"
Model = "model"
@domain = "scanner"
GS_EC_NOT_A_SCANNER = "Device not a scanner"
GS_EC_WRONG_SCANNER = "Wrong scanner"
GS_EC_SCAN_VIA_FILE = "Error scanning via file"
GS_EC_COMMUNICATION = "Scanner communication error"
EPSBitmap = "This EPS file contains bitmaps. To use them they must first be saved as .tiff files. Press 'Save' to select a filename or 'Ignore' to ignore them."
EPSConversion = "EPS Conversion"
NEW_STROKE = "New Stroke Bead"
UndoAddStrokeBead = "Add Stroke Bead"
UndoCreateFill = "Create Fill"
UndoDeleteFill = "Delete Fill"
UndoOrderFront = "Order Front"
UndoOrderBack = "Order Back"
UndoOrderForward = "Order Forward"
UndoOrderBackward = "Order Backward"
ChangedColorProfile = "Change Color Profile"
ChangedOpacityProfile = "Change Opacity Profile"
ToggledExtents = "Toggle Extents"
ToggledAngle = "Toggle Angle"
ToggledColor = "Toggle Color"
ToggledOpacity = "Toggle Opacity"
ChangeAngle = "Change Angle"
ChangedRedExtent = "Change Red Extent"
ChangedExtentWidth = "Change Extent Width"
ChangedGreenExtent = "Change Green Extent"
ChangedExtentOffset = "Change Extent Offset"
ChangedStartCap = "Change Start Cap"
ChangedEndCap = "Change End Cap"
ChangedCorner = "Change Corner"
ChangedItalic = "Change Italic"
ChangedClosure = "Change Closure"
ChangedScaling = "Change Scaling"
ChangedState = "Change State"
ChangeFillColor = "Change Fill Color"
ChangeFillRule = "Change Fill Rule"
UndoTransfer = "Transfer"
@domain = "worldbrowser"
WorldExistsReplace = "%0 exists, replace it?"
InvalidPath = "Invalid path"
CantCloseWhileRendering="Can't close world while rendering."
@domain = "worldgraph"
MaterialUsedByNode = "This material is used by some objects, these objects will be set to use the default undefined material.\n%0"
MaterialUsedByFace = "This material is used by some individual object faces, these faces will be set to the default undefined material. You cannot change individual face materials within this application.\n%0"
UndoRestoresMaterial = "\nUndoing this operation restores the material settings of objects also.\n"
NodeEditMultiMatChange="Selection includes objects which have multiple materials applied.\nConfirm to assign a single material to selected objects?\n(This can only be reset using the Undo function.)"
NodeEditMultiMatChangeTitle="Confirm material change"
@domain = "worldview"
Setkey = "Set key"
MoveAnimation = "Move animation"
@domain = "xsheet"
DamageContinue = "This operation may damage timing and key information. Do you wish to continue?"
RatioTypesDiffer = "Warning: Selected source column is of a different type to the ratioed key."
MotionNoColumn = "Could not find the column labeled %0 - skipping associated data."
MotionMultipleColumns = "Found more than one column labeled %0 - skipping associated data."
MotionUnnamedData = "Could not load unnamed data block - select a single numeric sub column."
MotionWrongType = "The column labeled %0 is not of the correct type - skipping associated data."
MotionPathMode = "The column labeled %0 is in path mode so data cannot be loaded - skipping data for this column."
MotionCannotHold = "The column labeled %0 cannot hold some of the imported data - skipping excess data."
MotionNoColumns = "No suitable columns are selected!"
SoundFailed = "The sound could not be loaded"
SelectRetry = "Select keys and try again."
InconsistentKeys = "The keys that you have selected are not consistent with the mapping that you have chosen."
KeysNotInLibrary = "\nYou have the following keys selected which will not be saved in the library: "
NumKeysNotInLibrary = "\nYou have %0 keys selected which will not be saved in the library."
NoKeysInLibrary = "\nThere are no keys selected for the following library entries: "
NumNoKeysInLibrary = "\nYou have %0 library entries with no matching selected key."
AlsoMultipleFolders = "\nFurther, you have keys selected in more than one folder. This is allowed, but is not normally desirable."
MultipleFolders = "\nYou have keys selected in more than one folder. This is allowed, but is not normally desirable."
CreatingLipLib = "Creating Lip Library"
SelectSoundCol = "Please select a sound column and try again."
NoPhonemes = "There are no phonemes on this sound column. Please choose a sound column with phonemes, or perform a phonetic breakdown on the SoundTrack in SoundTrackEdit & reload it."
SoundRateError = "The frame rate of the scene (%0) does not match that of the sound track (%1)."
CantAutoTime = "It is not possible to auto time key cells in this type of column"
TimingIncrease = "In order to change column timing, the scene length must be increased"
ChangeTiming = "Change Column Timing"
RemoveAllKeys = "Remove all keys?"
EmptyingXSheet = "Emptying XSheet"
MissingColumns = "One or more columns are missing."
NoKeySpace = "There is not enough space to insert these keys."
SpaceMove = "There is not enough room to insert the keys. Do you want to move the keys on the affected columns along by %0 to make room?"
SpaceMoveLengthen = "There is not enough room to insert the keys. Do you want to move the keys on the affected columns along by %0 and lengthen the scene to %1 frames to make room?"
OneFrame = "one frame"
ManyFrames = "%0 frames"
InsertingKeys = "Inserting Keys"
NoKeys = "No keys to insert."
NoSubColumn = "No sub-column selected to paste copied keys into."
WrongKeyType = "Wrong type of key for this column."
CannotInsert = "Cannot insert keys here."
CantShorten = "Cannot shorten scene to this length because there are key cells at later frames."
UndoSetKeyRatioed = "Set Key Ratioed"
UndoSetKeyUnRatioed = "Set Key Unratioed"
UndoImportMotionData = "Import Motion Data"
UndoUnitChange = "Unit Change"
UndoDisplayChange = "Display Change"
UndoPrecisionChange = "Precision Change"
UndoApplyRatioValues = "Apply Ratio Values"
UndoInterpChange = "Interpolation Change"
UndoMoveBead = "Move Bead"
UndoNumberEdit = "Number Edit"
UndoMove = "Move"
UndoChangePathMode = "Change Path Mode"
UndoAddColumn = "Add Column"
UndoAddSubColumn = "Add Sub Column"
UndoChangeLength = "Change Length"
UndoChangeXSheetLengthOrTrimValues = "Change XSheet Length Or Trim Values"
UndoMoveCells = "Move Cells"
UndoMoveColumns = "Move Columns"
UndoCut = "Cut"
UndoDelete = "Delete"
UndoPaste = "Paste"
UndoChangeTiming = "Change Timing"
UndoChangeSampleRate = "Change Sample Rate"
UndoEmptyXSheet = "Empty XSheet"
UndoRing = "Ring"
UndoCreateKey = "Create Key"
UndoColumnTiming = "Column Timing"
UndoChangeHoldLength = "Change Hold Length"
UndoEditCellText = "Edit Cell Text"
UndoMethodChange = "Method Change"
UndoChangeColor = "Change Color"
UndoFormatChange = "Format Change"
UndoEraseScribble = "Erase Scribble"
UndoScribble = "Scribble"
UndoAddMacro = "Add Macro"
UndoPathChange = "Path Change"
UndoApplyLipLibrary = "Dope From Soundtrack"
UndoSetSoundOffset = "Set Sound Offset"
UndoImportPTFile = "Import Pencil Test File"
UndoOrderChange = "Order Change"
UndoModeChange = "Mode Change"
UndoFactorChange = "Factor Change"
UndoRGBChange = "RGB Change"
UndoHSVChange = "HSV Change"
UndoTintChange = "Tint Change"
UndoGraphChange = "Graph Change"
RandomTiming="Randomize Timing Failure"
RandomTimingAccept="Accept"
RandomTimingWrong="Randomize Timing has produced consecutive identical keys. Do you wish to retry or keep the consecutive keys?"
UndoRepeat = "Repeat"
CantRepeatOverlap = "There are already keys at some frames where this repeat would be created."
CantRepeatOne = "Please select more than one key to repeat, or select a column to repeat all its keys."
CantRepeatOneCol = "There is only one key in this column. It cannot be repeated."
NoRepeatSpace = "The scene is too short to repeat the keys. Do you wish to extend the scene?"
CantRepeatKeys = "These keys cannot be repeated."
CantRepeatNonContig = "Please select a contiguous range of keys to repeat, or select a column to repeat all its keys."
PasteLengthen = "There is not enough room to insert the keys. Do you want to lengthen the scene to %0 frames to make room?"
NoSoundtrack = "There are no sounds in this scene which have phonemes."
NoMapping = "The selected column has no phoneme mapping."
NoMappingKnown = "The selected column cannot reference a phoneme mapping."
SelectOneDrawingCol = "Please select one column to dope from a soundtrack."
CreateHold = "Set Hold"
CreateBlank = "Set Blank"
@domain = "xsheetsc"
FileOpFailed = "File Operation Failed"
FolderExists = "The folder %0 already exists. Contact your system administrator."
CantCreateFolder = "Could not create the new folder %0. Contact your system administrator."
CantResetPath = "Could not reset the path to %0. Contact your system administrator."
FolderNotFound = "Could not find the folder %0. Contact your system administrator."
CantOpenFile = "Could not open the file %0. Contact your system administrator."
CantCompareFiles = "Could not compare the files %0 and %1. Contact your system administrator."
CantRenameNonFile = "Could not rename the file %0 as it does not exist. Contact your system administrator."
CantDeleteNonFile = "Could not delete the file %0 as it does not exist. Contact your system administrator."
